Flow

This will be very useful for visual clash checking in the 3D viewer. It will also be very beneficial in Live Design and SmartTools

If links are short Flow flags it up, but just round up to 1m without users having to re-specify This can better integrate with SmartTools.

Water authorities are asking for a foul water network analysis to confirm the velocities, pipe diameters and flows. Flow cannot provide this information because the foul network has not outlet and it gets flooded. Your response is to add an hydrog...

The software asks for infiltration rate as m/hr which is based on BRE365 Infiltration testing in trial pits. Trial pits are not feasible for deep infiltration and as such the radial infiltration rate, the one we get from borehole testing, should b...

A wizard for reducing down one or more storage structures to the optimum required size. Something like this: Select all storage features of interest. Enter key design criteria (e.g. max depth, porosity, design storm of interest etc.) Run an optimi...

We need to upsize wastewater pipes from 150mm dia. to 225mm dia. as soon as the total number of dwellings contributing to that pipe exceeds 20. Could this be added to the Auto-design parameters?

In Causeway Flow, having an option to "Select All" storm durations in simulation settings, as well as when specifying a surcharged outfall for a specific return period, would be useful. Also, having the option to specify a surcharged outfall by wa...